Search found 38 matches

by Atlantic
Wed Jun 16, 2021 4:47 am
Forum: The Workshop
Topic: Daihatsu 6DC-17 High exhaust temperature
Replies: 4
Views: 278

Re: Daihatsu 6DC-17 High exhaust temperature

How is the temps recorded? Local or remote. Check that it’s showing the true temp. What fuel are you running on?
by Atlantic
Wed May 19, 2021 6:08 am
Forum: The Workshop
Topic: Atlas copco mas ga 37 compressor
Replies: 4
Views: 347

Re: Atlas copco mas ga 37 compressor

Did you clean the cooler. Check the running hours too? is it constantly running or shutting down after unloading you can check the settings. What’s the ambient temperature in the space. Check the manual for fault racing? Check belts and if the fan is running ok.
by Atlantic
Tue Apr 20, 2021 6:57 pm
Forum: The Workshop
Topic: Engine Explosion
Replies: 2
Views: 408

Re: Engine Explosion

Interesting article, short turnaround ? use of the cheapest contractor? no time for crew to overseeing the work? I also find that most maintenance system follows the location not the part. For example piston cylinder #1 but if you take that piston out put an overhauled piston in what’s the history o...
by Atlantic
Mon Sep 14, 2020 3:07 pm
Forum: The Workshop
Topic: Alfa Laval 615 Purifier
Replies: 1
Views: 659

Re: Alfa Laval 615 Purifier

Hi,

I would start by checking the water supply, Check pressure, strainers and timing of the valves. Check the manual for fault tracing.

Atlantic
by Atlantic
Mon May 04, 2020 6:53 am
Forum: The Workshop
Topic: Windlass not taking load on my ship, ideas to fix it
Replies: 21
Views: 5315

Re: Windlass not taking load on my ship, ideas to fix it

Is there any plugs to air it out? Check the manual for procedure to air it out. Check the relief valves on your control block if any? Is the brake releasing proper?

Good luck and regards
by Atlantic
Sat Jan 18, 2020 7:55 am
Forum: The Workshop
Topic: Alfa Laval PU150 problem
Replies: 6
Views: 3171

Re: Alfa Laval PU150 problem

How is the pressure sensor mounted could it be dirty or the pipes going to it? Did you check that you have the right flow rate/pressure on the water.
by Atlantic
Thu Jan 16, 2020 3:59 am
Forum: The Workshop
Topic: Alfa Laval PU150 problem
Replies: 6
Views: 3171

Re: Alfa Laval PU150 problem

Check the water valves and the water pressure, also air pressure for the 3 way valve. does it have nozzles in bowl? Change them out. Is the electrical motor frequency controlled? There could be issues there.
by Atlantic
Tue Oct 22, 2019 1:57 pm
Forum: The Workshop
Topic: Alfa Laval S846 HFO Separator problem
Replies: 22
Views: 7952

Re: Alfa Laval S846 HFO Separator problem

Hi,

Is it belt driven? Check the clutch pads and the surfaces for the pads, belt tension is also important. If it slips the bowl speed drops. Check the manual for number of pads to be used it can differ dependent of what set up you have.
by Atlantic
Wed Feb 06, 2019 3:25 pm
Forum: The Workshop
Topic: Dirty/brown/orange colour cooling water
Replies: 27
Views: 9644

Re: Dirty/brown/orange colour cooling water

Maybe take a sample of the water you are using and mix it with coolant and let it sit to see if it gets discoloured. Look into the chemical you are using is it the right type for the material used in the engine cooling system.
by Atlantic
Wed Feb 06, 2019 9:30 am
Forum: The Workshop
Topic: Dirty/brown/orange colour cooling water
Replies: 27
Views: 9644

Re: Dirty/brown/orange colour cooling water

Hi

I agree with big Pete it’s running to cold maybe a cracked liner or engine block.
by Atlantic
Sat Feb 02, 2019 4:31 pm
Forum: The Workshop
Topic: Engine cannot start
Replies: 35
Views: 10423

Re: Engine cannot start

Maybe they didn’t fill out the right checklist? Try arrival departure and DP checklist? :roll:
by Atlantic
Sat Dec 22, 2018 7:05 pm
Forum: The Workshop
Topic: Engine cannot start
Replies: 35
Views: 10423

Re: Engine cannot start

Hi Did you check that you got fuel at the injectors? aired out the fuel system? More crazy stuff; are there any emergency stops are they reset? Any rig saver dampers in the air intake if so are they open? Is it turning the right way? Maybe the wrong starter? Is it turning fast enough air pressure co...
by Atlantic
Fri Oct 26, 2018 2:17 am
Forum: The Workshop
Topic: ALFA LAVAL HIGH SPEED LUBE OIL SEPARATOR
Replies: 3
Views: 3344

Re: ALFA LAVAL HIGH SPEED LUBE OIL SEPARATOR

Check the centrifugal clutch if fitted, may need new pads or be worn out so it doesn’t clutch in at the right speed. Also check the temp of your oil.
by Atlantic
Wed Jan 10, 2018 6:37 pm
Forum: General Job topics
Topic: Transport Canada issues
Replies: 5
Views: 4012

Re: Transport Canada issues

I wrote my exams at Halifax office and everyone there was great! Very helpful. I find lots of it is how you approach them. They don’t make the rules they just try to follow them. Some guys go in with chip on their shoulder and argue with them about everything. Having said that I heard to stay away f...
by Atlantic
Tue Dec 26, 2017 5:15 am
Forum: Crew Mess
Topic: Taxes
Replies: 10
Views: 4077

Re: Taxes

Hi Xhead, If you live in Canada you have to pay tax here. The best way to do that is to put part of your pay aside and pay installments 4 times a year. If you don't they will ask for interest on the money you owe in taxes. If you work in an other country and pay tax there you can in most cases subtr...