Good day I am wondering if any of you have sailed for TeeKay tankers and would be able to tell me about the work conditions on board? What is the leave system like? I have my 4th class motor and working on my tanker endorsement as we speak and am quite interested in applying for this company. Thank ...

too late i passed it

thanks anyways though

Thanks Nailed it

Naval Arc Wednesday thats the worst one in my opinion

How do i even start this?!?!?!?! C24. For a ship 135 m in length, 16.0 m breadth the values of tonnes per centimeter immersion (TPC) in water of density 1025 kg/m3 are as follows: Draught 1.2 1.8 2.4 3.0 3.6 4.2 4.8 TPC 14.6 14.83 15.1 15.36 15.54 15.7 15.82 The displacement of the ship below the 1....

A fuel tank bulkhead is made in the shape of a trapezoid 13 m wide at the top, 10 m wide at the bottom and 7.5 m deep. When the tank is filled with fuel of 5 m, calculate: 1- the load on the bulkhead 2 the position of the center of pressure relative to the surface of the fuel note: R.D. of fuel = 0....

A rectangular Block of wood of square cross section of side Sand length L greater then S is to float in fresh water with its horizontal axis parallel to the waterline, the sides are vertical and in neutral equilibrium. Calculate the relative density of wood. Now how am i supposed to approach this qu...

thank you mathias
saw this just in time im writting this exam this afternoon. My stress level is through the roof

Im writing his tomorow afternoon lol help a guy out

I have to agree with TheDieselduck here, many great lakes company are phasing out the Mechanical assistant and Oiler jobs in favor of hiring M.U.C (mobile utility crew member) at least i know this to be true for the Tanker fleet. Most of the UMS vessels actually phased out the need for even 4th engi...

my guess would be it has to do with the unitless Density that is posted.?

Any ideas?

She's a passenger tour\short cruise boat. I wouldn't say she missed the turn, more like the guy on the bridge wasn't paying attention to what he was doing from what I hear.

At least every one made it safely out.

Good day fellow engineers, I am currently studying to tackle my second 1rst class exam the applied thermodynamics. I've been going through the sample exam questions listed in the ship's library and have some questions regarding Question 10 The answer listed says 43cm for the diameter and i keep arri...