Stern tube

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
Kristaps0984
Bilge Dweller
Posts: 6
Joined: Wed Sep 26, 2018 7:20 am
Currently located: North sea

Stern tube

Postby Kristaps0984 » Sat Nov 17, 2018 6:35 am

Good afternoon!
I have a problem with stern tube. Today checked the header tank and it was overflowed. Yesterdey everything was ok. At the moment the oil is staying in one level but higher than it was aproximetly 10 cm higher (Header tank is full).
Stern tube is naturaly lubricated. No pumps.
Ship is 25 m trawler.
Any advice would be appriciated.
Thanks!

User avatar
Big Pete
Engineering Mentor
Posts: 863
Joined: Fri Apr 24, 2009 11:18 pm
Currently located: Solihull, England

Re: Stern tube

Postby Big Pete » Sun Nov 18, 2018 1:30 pm

There should be a Hydrostatic pressure balance between the water outside and the oil inside, because Sea Water is more dense than oil the stern tube header tank is always higher then the Sea Water outside, in proportion to the different SGs.
Has the Draught aft increased ? That might cause Sea water to pass in through the Stern Tube Seals and increase the level of the header tank making it overflow.
BP
It is always better to ask a stupid question than to do a stupid thing.

rodrigger
Deck Plate Wanderer
Posts: 20
Joined: Wed Jul 20, 2011 10:06 am

Re: Stern tube

Postby rodrigger » Sat Nov 24, 2018 7:40 pm

no experience working on a trawler. Does the stern tube have an arrangement to check void space between the sea water and oil seal. If you do...draw a sample and you will know if your seal has compromised. Check the vent is clear.


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 2 guests

 

 

cron