Padeye design spreadsheet(www.thenavalarch.com)

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
thenavalarch
Leak Patrol
Posts: 35
Joined: Fri Nov 15, 2013 10:45 pm

Padeye design spreadsheet(www.thenavalarch.com)

Postby thenavalarch » Fri May 02, 2014 6:10 pm

Hi!

www.thenavalarch.com launches the pad-eye design spreadsheet

This excel spreadsheet helps design a pad-eye for Lifting or Marine Transport Operations/Lashing design. It can also be used to verify an existing pad-eye for sling loads.

A simple pad-eye without brackets, and with one cheek plate can be designed/tested.

A video demonstration of the spreadsheet is here:


http://www.youtube.com/watch?v=YVMPWe5D ... e=youtu.be



It rigorously calculates all the stresses coming onto the pad-eye, viz.

1. Geometry check: Main plate radius, Shackle clearances

2. Stress Check for Pin Hole (Tensile, Bearing, Shear, Hertz stress)

3. Stress check for Base Plate (Tensile, Bending, Shear, Von Mises and Combined)

4. Stress Check for Base Weld (Tensile, Bending, Shear, Total Stress)

5. Shear Stress Check for Cheek Plate Weld



Immensely useful for Marine Operations. It is based on the standard references:

AISC ASD

API RP 2A WSD

Nobledenton Guidelines for Marine Lifting and Lowering Operations 0027/ND.

For more information, please visit:

http://www.thenavalarch.com/padeye-design-spreadsheet/

Thanks and best regards

www.thenavalarch.com

User avatar
The Dieselduck
Administrator
Posts: 2748
Joined: Sun Jul 22, 2007 1:41 pm
Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)

Re: Padeye design spreadsheet(www.thenavalarch.com)

Postby The Dieselduck » Sat May 03, 2014 8:02 pm

Just had a look at the video, looks well thought out and easy to use. Not sure how I would use it on a daily basis but would certainly be beneficial to double check others work, if anything.

Congrats, and thanks for sharing.
Martin Leduc
Certified Marine Engineer and Webmaster
Martin's Marine Engineering Page
http://www.dieselduck.net

thenavalarch
Leak Patrol
Posts: 35
Joined: Fri Nov 15, 2013 10:45 pm

Re: Padeye design spreadsheet(www.thenavalarch.com)

Postby thenavalarch » Fri Jun 13, 2014 6:02 pm

Thanks for the review and comments. Much appreciated.


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 1 guest