Volvo Penta TAMD 71B

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
Stan
First Time Poster
Posts: 1
Joined: Wed Sep 24, 2014 1:12 am

Volvo Penta TAMD 71B

Postby Stan » Mon Sep 29, 2014 8:44 am

We had our two Volvo Penta 71B engines this past winter sent out to be re-built. After the re-build and re-installation on our tour boat, we now find they are now each using a litre of oil, after a days operation. What could have been done or not done in the re-build to create this new issue with the Volvo Penta's? SVMO Stan

User avatar
JollyJack
Fleet Engineer
Posts: 1101
Joined: Wed Mar 24, 2010 3:57 am
Currently located: Eastern Canada

Re: Volvo Penta TAMD 71B

Postby JollyJack » Mon Sep 29, 2014 9:25 am

Oil scraper rings installed upside down, they'll scrape oil off the cylinder walls, upward toward the combustion chamber, instead of down to the crankcase. Happened to me on a genny "rebuilt" by a Russian "Chief" I relieved and his Russian 4th. He "saved money" by reusing the piston rings, turning them upside down so they'd wear the other way. (?????)
Discourage incest, ban country "music".

User avatar
JK
Enduring Contributor
Posts: 2676
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Re: Volvo Penta TAMD 71B

Postby JK » Mon Sep 29, 2014 10:00 am

the question is, who overhauled it?

User avatar
Big Pete
Engineering Mentor
Posts: 786
Joined: Fri Apr 24, 2009 11:18 pm
Currently located: Solihull, England

Re: Volvo Penta TAMD 71B

Postby Big Pete » Mon Sep 29, 2014 9:59 pm

Were the liners de-glazed (Honed)? if they didn't do that, but fitted new rings the engines will drink oil. The new piston rings will never wear in to make an oil and gas tight seal against the liner, just skid over the top of the glassy glaze.
If they are using that much oil, then I would have thought that you would have a legal case against the people who did the work. The overhaul was not done to an acceptable standard, and they should either pay for it to be done properly by competent Engineers or do it themselves properly, ( if you trust them with your engines a second time)

B.P.
It is always better to ask a stupid question than to do a stupid thing.

User avatar
The Dieselduck
Administrator
Posts: 2683
Joined: Sun Jul 22, 2007 1:41 pm
Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)

Re: Volvo Penta TAMD 71B

Postby The Dieselduck » Wed Oct 15, 2014 7:44 am

He "saved money" by reusing the piston rings, turning them upside down so they'd wear the other way.


Points for creativeness if nothing else.
Ive been leaning toward a customer service model while at work, and knowing what your customer want is central to that. In this case the "Chief" knows what the company wants, at least in the short term.

Fantastic story.
Martin Leduc
Certified Marine Engineer and Webmaster
Martin's Marine Engineering Page
http://www.dieselduck.net


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 1 guest