Cold Straightening of Main Propulsion Shaft in Canada?

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
aron
Bilge Dweller
Posts: 9
Joined: Sun May 12, 2013 12:56 pm
Currently located: Rimouski

Cold Straightening of Main Propulsion Shaft in Canada?

Postby aron » Tue Sep 12, 2017 5:42 am

Hello to all,
I would like to know if anybody could recommend a company within Canada that could perform a Cold Straightening of a spare shaft for our vessel due to excessive run-out.
Weight: 4,000 kgs
Length: 10,000 mm
Diameter: 240mm on the shaft, 568mm on the flange.
In the past a previous shaft was sent to Marine Shaft in Europe, but naturally would like to send it within Canada.
The shaft is currently located in Quebec.
Thank you for your assistance.

User avatar
JK
Enduring Contributor
Posts: 2691
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Re: Cold Straightening of Main Propulsion Shaft in Canada?

Postby JK » Tue Sep 12, 2017 10:58 am

You could give Tony at CME a call 902-468-1888
Second thought, their machinest

User avatar
D Winsor
Superintendent
Posts: 330
Joined: Thu Nov 22, 2007 8:23 am
Currently located: Dartmouth

Re: Cold Straightening of Main Propulsion Shaft in Canada?

Postby D Winsor » Wed Sep 13, 2017 8:07 am

Have you tried
Allied Marine & Industrial
1 Lake Road, Port Colborne, ON L3K 1A2
Tel. 905-834-8275 Fax 905-834-5645
sales@allmind.com

or

Mount Royal /Walsh Inc.
2101 Aird Ave.
Montreal, Quebec H1V 2W3
Phone number 1-514-255-3301
Fax Number 1-514-255-8851
Toll Free 1-888-255-3301
Email mrw@mrw-group.com

If they don't have the capasity do the job they could know someone who can
Troubleshooting 101 "Don't over think it - K.I.S.S. it"


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 1 guest