trouble engine

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
Post Reply
adreno1981
Tanktop Cleaner
Posts: 19
Joined: Mon Jul 13, 2009 5:59 am
Contact:

trouble engine

Post by adreno1981 »

hey fellas ,

b&w gfca engine series , running smoothly , enters a port without any troubles.when leaving port after loading , during trying out the main engine all units air starting line bursting discs burst with a very very loud explosion and thick dark smoke in engine room.
guess who is the culprit.
** its an intresting problem and definetely had a solution.
adreno1981
Tanktop Cleaner
Posts: 19
Joined: Mon Jul 13, 2009 5:59 am
Contact:

Re: trouble engine

Post by adreno1981 »

hey fellas,good day !
d culprit was none other than the main automatic air starting valve , getting stuck in the open position for a longer duration of time , and other culprit was , one of the fuel injectors dripping in to the cylinder with the starting air valve leaking for the same unit....it was a nightmare trracing that problem...
adios
adreno
Post Reply