New engine

General maritime and engineering discussion occurs on this board. Feel free to post newsbits, comments, ask questions about maritime matters and post your opinions.
Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

For this size Windmill Red Baron, surely the need for such an actuator driving a generator .. You know that place slot, achieved speed by air is three times greater than the wind blowing from the face of this wing?

Image

Image


Image

A new family of wing profiles with slot .. NACA FELIKS

Image


Andrew :mrgreen:

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

Image

Image

Image


:D

User avatar
The Dieselduck
Administrator
Posts: 3509
Joined: Sun Jul 22, 2007 1:41 pm
Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)

Re: New engine

Post by The Dieselduck »

Whooaa, that's a big a roots blower!
Martin Leduc
Certified Marine Engineer and Webmaster
Martin's Marine Engineering Page
http://www.dieselduck.net

User avatar
JollyJack
Fleet Engineer
Posts: 1184
Joined: Wed Mar 24, 2010 3:57 am
Currently located: Eastern Canada

Re: New engine

Post by JollyJack »

Rootes, the design is by the Rootes Group, which was absorbed by Vauxhall and, in it's turn, was bought out and taken over by Chrysler. They made cars like the Hillman Imp and Vauxhall Victor as late as the '70s.

I believe Detroit Diesel got it from Rootes, before they were merged with Vauxhall. That's the only reason I can think of which explains why GM owns a Chrysler patent.
Discourage incest, ban country "music".

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

:D :D

Do it now truest innovation .. every airman will save $ 500
In what way? do not have to buy these two venturi tubes to drive clocks ..
Just as in the right wing mount piping spot by not ordinary round a tube and connect the plastic with clocks ... cost of $ 5 ..

After all, on top of an airplane wing vacuum is too ..:D

Image

https://www.youtube.com/watch?v=nbav0O3E-S8

Andrew :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

Christmas gifts:
here my scan such a disease illustrate how will they move the pistons in my engine in 1981, there was no possibilities of making animation and we had to somehow manage .. and the adoption of a decision which is to be the angle of the upper shaft between the pistons was not easy .. But it turned out, however, the simplest of which is 90 degrees should fulfill its task and so happened .. Exactly the drawing start is: 0 degrees angle of the suction piston, the piston 90 degrees exhaust (the figure is badly) and the main piston 80 degrees ..

Image

Here how the work ..

Image

Marry Christmas

Andrew :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

Here, a model project of The Spoon Red Baron Tractor. Human powered Dedalus, a comprehensive Weight about 100 Kg. It has been proved that, at a power of 0.3 Kw can take place before long flights .. Here my project model can be 100 times lighter, or to his same drive just 300 watts / 100 = 3 watts .. I think that such a model will be able to produce up more, so I called him a Tractor, he can still pull a glider behind him ..

Image

http://www.youtube.com/watch?v=pPZWUQlhvDA

Andrew :D :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

With time on holidays, this Yoda even sent a picture from NASA Simulator, explaining many things ...
Oh yes you can see that the lift force (lift) is three times greater than the resistance (drag) the wings .... The diagram shows that the velocity profile at 25% is almost 3 times higher on average .. The purple line on the graph .. The green line is the wind speed .. Yellow is the speed of the lower side profile .. Wind speed is 15 km / h ... At the start of a profile is almost 50 km / h ... Such profiles should have the Red Baron Windmill (spoon too) ..

Image

Image

If the speed is increased by three times, then by using dual such a system, we can get about 9 times Increased speeds the wind that blows on the system .. it is worthwhile to do so .. Well of course, because in the formula for Velocity windmill power plays up to the third power, it is possible to obtain power .. no examples listed here .. for 5 m / s .. Windmill with a diameter of 100 meters are 2,000 KW us .. Now if we take a larger representation rate 9 times that or 45 m / s, it is already at 10 meters in diameter windmill get 2,300 KW. ie the same windmill is ten times smaller .. the rest of the structure is virtually immobile and will not be higher than 50 meters .. as follows from theoretical calculations.'s say the length of the building is 100 m, which can fit 10 windmills in it .. theoretically get 23 MW at a wind speed of 5 m / s.
But of course we can use the Windmill Red Baron ..

Image


Andrew :D :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

If you do not believe my calculations, it can send a check to the CERN ..:rolleyes:

Image

Happy New Year Andrew :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

So embarrassing new year to start something pleasant .. Here, the recording band Blue Black and Ada and Wojtek cover what is served up at concerts in the Soviet Union in 1973, passing from the scene, the better, "my Friend" than the "cold war" .. ..
And I think I succeeded ..

Ada unfortunately died 1 January 1991.

http://www.youtube.com/watch?v=famP4wb5vac


Here, too, if someone did not know that Beatles song and accompaniment of the Kings ...

http://www.youtube.com/watch?v=_wG6Cgmgn5U

Andrew :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

So on your way I think, why this project Manchattan taken a Pole, who only since the outbreak of war in 1939 was in England .. After all, his English was not too good for sure .. British citizenship also quickly got something to this project could attend ... ... But I know war, accelerates various activities ... But the English did not really even war .. Therefore I am full of admiration .. as a sincere desire ..
Here in the video you can see, the then fairly good the English had ..
Each fought as best he could to make this world a better place .. Sometimes it was not easy ..

http://www.nfb.ca/film/strangest_dream

:D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

Well, here , a movie that shows that " spoon effect" is possible to obtain a large area, no such model of the wing , set " bellies " to each other. Between the wings , air is blown using an ordinary hair dryer .. The second part of the film , you will see that blowing this way only one wing , we can feel the hand , there is some lift of the wing . Simply it is so microscopic that it can not feel , despite the fact that once we're blowing on the wing , then do not . I do not feel any difference. The reason is also that the air dryer has a very low speed, and it is relatively very little ..
However, as we hold as two wings . set ' bellies to each other, and kept at one end , the other end , a very intense vibration , bouncing off each other, as a result of blowing the hair . the film do not really see these vibrations because their speed is high , as the camera does not records so quickly. records and revealed that the image of " waving wings. " In a time while also heard the " clack " of themselves striking the wings .. so attractive force them to each other must be large, as seems the powerful sound of beats between them. wing to descend , and then diverge , and again, there are withdrawal force with each wing , and so the circle. But fairly quickly , despite the relatively large area of ??the wings in relation to a small air stream flowing between them ..
In any case , it is this force several times to each side of the Astringent greater than the lift of a single wing , which you can not even feel that there is in these conditions ..

http://youtu.be/KpIWhqW7lWA

Andrew :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

Of course the pipe that goes through the negative pressure means can be any lengths, and generators placed On the surface of the earth .. This may be from a set of several such sets ..

Image

Andrew :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

Here a further explanation of why dual Red Baron can give at 100km / h about 300 mm of mercury vacuum. .. . ..
Here is a pdf of the classical venturi air, and why is it used double nozzle.

http://www.new4stroke.com/Venturitubes1937.pdf

Image

And now, what are the parameters of the two nozzles that you can buy .. of similar size
The first nozzle gives 4 inches (101 mm Hg) of vacuum of mercury and has a length of 10 inches.

http://www.aircraftspruce.com/catalog/i ... nturi2.php

The second nozzle gives up 9cali (228 mm Hg) of mercury vacuum, and the length is 11 1/4 inch. That is 11% plus growth in vacuum and lengths are more than 100% .. That depends on the vacuum from a very proper way to design the nozzle ..

http://www.aircraftspruce.com/catalog/i ... nturi3.php

Similarly, the need to design a properly configured dual Windmill Red Baron to repair the effects were good.
Here you can not scoff case.
The rest will depend on the size of the system..

Andrew :D

Feliks
Superintendent
Posts: 361
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Post by Feliks »

Underground sarcophagus must be the first in Fukushima.

Image


Andrew :D

Post Reply