New engine

General maritime and engineering discussion occurs on this board. Feel free to post newsbits, comments, ask questions about maritime matters and post your opinions.
User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Sat May 31, 2014 1:50 am

Thanks Desmo of reminding us of the man who he liked the various interesting things to do ..

http://en.wikipedia.org/wiki/AeroVironment

This V8 Fireworks do not read my posts carefully and do not know that the inside of the wings is ... nothing ..

Well it looks like jeszce wing in cross-section, ie Naca Felix. and this is the name of the family that founded and requires determine what gaps, gfzie placed on which profiles also those bumps to the network, probably can be hundreds of types ..

Image

Here .. I will do my prototype which acts from the top of the second wing multiplied by quantity and quantity received vacuum ..

Of course, you should quite carefully chosen angles of attack these wings and the distance between them ....

http://www.youtube.com/watch?v=pPZWUQlhvDA

Then the pair of wings are fastened to the treadmill, instead of oxen to the appropriate spin speed and expected energy ....:hehe:

Image

Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Sat May 31, 2014 1:52 am

Posted Today, 04:22
gruntguru, on 27 May 2014 - 00:58, said:
My money is on the oxen.. /quote

Oxen can become sick and will die. Besides then you must have 3 pairs of these oxen after 8 hours of work .. You know how much they eat ? Not unless you are very rich .. :rolleyes:

can be several such pairs of wings with several compartments assemble and put on the ends of the pipes that supersede the broken windmill propeller .. There, at the end of the speed will be about 1 Mach .. Now you are at the disposal of the entire lift (lift) or how to get from the calculation of the efficiency of the above , about 7% of it you'll already have excess energy for 24 hours...

of course, each chamber will give others a vacuum, and therefore they must propel the various dimensions of the turbine, but connected on one axis ..

of course the whole family Naca Felix mission to be present. This is only the second descendant ..:rolleyes:

then are the chances of get sick of the high efficiency ..

The most important thing .. You know that the oxen have yet to clean up? ..:laugh:

Image

Image

Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Mon Jun 09, 2014 8:58 am

No, if anyone can stop the "Physics" from the next disaster? . I do not have the strength to tell you how you should do it ... with 2-meter tunnel adjacent to one another and having a hole at the top, through which a whole this stuff will affect them, and can be removed .. This method of freezing is crazy dangerous because it can destabilize the ground beneath the reactors .. Every physicist should know that water freezes into ice, its volume increases by 10% .. why iceberg floats .. ai thanks on the road doing spring breakthroughs .. and here such a "breakthrough" they want to do the reactors, which may lead them, the 40-meter deep freeze, to improve the soil by 10%, which is 4 meters .. what happens to them, it is not difficult to foresee * as it has imagination, and not just academic titles ... If someone does not know what it is ice here, please : http://en.wikipedia.org/wiki/Water .. Besides, this water accumulates on the ice must continue to have some outlet, because it is not a "black hole" ... Help!

http://www.bbc.com/news/world-asia-23940214

Andrew :evil:

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Wed Jun 11, 2014 1:27 am

Well, the couple is also reasonable and imagination of people .. I do not feel so lonely .. :roll:

http://enenews.com/japan-nuclear-prof-i ... ent-531509

Andrew :D

dingdieselduck
Bilge Dweller
Posts: 2
Joined: Thu Jun 19, 2014 9:20 pm

Re: New engine

Postby dingdieselduck » Thu Jun 26, 2014 7:07 pm

This website is very informative especially for us who are looking for marine equipment. I am a student of Marine Engineering and I need to study and search about marine supplies and I stumbled upon this website http://www.thegreenbook.com/products/marine-equipment-supplies/.

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Wed Jul 23, 2014 1:37 pm

Here are many pictures of these in one movie ..

https://www.facebook.com/photo.php?v=667344086668632

Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Thu Aug 21, 2014 3:51 pm

Here historical figure .. then only the best solution was graph paper .. Figure was every day for 1 month used, when did this lathe crankshaft. The crankshaft has five supports and four crank, 90 degrees .. starting weight of the material (iron containing 5% cobalt) was 80 kg (160 lb) is the world's first practical crankshaft timing ..

Image

Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Fri Aug 22, 2014 3:00 pm

And here's how it looks in the original .. It is not enough to come up with a way to the engine ... still need to know how to realize ... only together give a true effect ..

Image

Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Thu Nov 06, 2014 3:49 am

Greetings to all from the Engine Expo 2014 in Novi Detroit ....

Image

Image

Image


I'm worried, because you will be some news about this new engine somehow obtain. As I wrote above, only 25% of the engines messages may come in handy .. The rest 75% you have to re-learn .. :shock:

Regards Andrew :D

User avatar
The Dieselduck
Administrator
Posts: 2683
Joined: Sun Jul 22, 2007 1:41 pm
Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)

Re: New engine

Postby The Dieselduck » Sat Nov 15, 2014 9:20 am

Congrats on your presentation. Did you get positive feedback? These events can sometimes feel like a waste of time, but you only need to connect with one person to make it worthwhile.
Martin Leduc
Certified Marine Engineer and Webmaster
Martin's Marine Engineering Page
http://www.dieselduck.net

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Tue Nov 18, 2014 1:52 pm

Here are the materials you can download a PDF of the conference .. I am at the end of the first day, as it was in the schedule

http://www.ukintpress-conferences.com/c ... /index.php

http://www.ukintpress-conferences.com/c ... view=drill

Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Wed Dec 17, 2014 1:10 pm

Santa Claus is always something for Christmas will bring a gift. This year a new type of Venturi nozzle ..
Christmassy greetings

http://www.new4stroke.com/venturif.jpg

Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Sat Jan 17, 2015 10:23 am

Please, just without the blades and the fan too ... Because, however, Dyson has propeller blades inside, only small ...And here's the real bladeless....

https://www.indiegogo.com/projects/tesl ... eiling-fan

Here sure everything much more energy efficient. As someone wants to read about Tesla turbine efficiency is here
http://www.imp.gda.pl/osrodki-naukowe/o ... iny-tesli/

Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Sat Feb 28, 2015 6:35 pm

Next video of the Red Baron Windmill prototype "Effect spoons" ... Now, despite the simplicity of the prototype and are not necessarily matched the gap between the wing and the small fan, already takes off at a speed of 25 km / hour or 7 m / sec wind speed. At 40 km / h, the fan spins very quickly., Much better. than in the experiment with a single wing ..

http://youtu.be/yyHTAlXLuXo

Regards Andrew :D

User avatar
Feliks
Chief Engineer
Posts: 259
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Krakow,Poland

Re: New engine

Postby Feliks » Tue Mar 03, 2015 9:01 am

Here another video. The world's first Aerodynamics effect acting through blowing mouth. After puff heard hitting one wing of the second, and it's a loud ..

https://www.youtube.com/watch?v=UV2pTLhHBec


The pictures show the device to adjust the distance and angle between the wings
Yet research curiosity. Windmill spins better when opening the other wing is not blocked ..

..

Image

Image

Image


Andrew :D


Return to “Crew Mess”

Who is online

Users browsing this forum: Merlyn and 1 guest