Movie Blooper

General maritime and engineering discussion occurs on this board. Feel free to post newsbits, comments, ask questions about maritime matters and post your opinions.
User avatar
JK
Enduring Contributor
Posts: 2676
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Movie Blooper

Postby JK » Wed Feb 27, 2008 10:43 am

I watch the end of the movie "The Contract" yesterday, mainly because part of the plot centered around one of the CSL ships being wired to blow up.
They went through great lengths in the show to describe blowing up the ship, for whatever reason they would blow it up and the henchman went off to wire the detonator.
Next scene shows him with it wired up to a bank of CO2 bottles :shock: :roll: . I guess the implication was that they were a gas bottle and they would go off with great effect. :lol:
It was actually painful to watch.
I don't think I would mind being paid to run around on the for'd deck though, playing the modern day version of Cowboys and Indians like they were .
Anyways, bored here at work and thought I would relay this shining example of cinematography.

User avatar
ArkSeaJumper
Engineering Mentor
Posts: 124
Joined: Fri Sep 07, 2007 8:02 am
Currently located: Ireland

Postby ArkSeaJumper » Thu Feb 28, 2008 5:39 am

Still the worst has got to be 'Speed 2', where they managed to turn the ship, at full speed by moving the bow thruster one or two turns.

User avatar
JK
Enduring Contributor
Posts: 2676
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Postby JK » Thu Feb 28, 2008 10:19 am

or the guy dangles from a rope just in front of the turning prop when he is trying to feed the mooring line into it :shock: Turn the fuel off dummy, if you want 'er to stop.

User avatar
The Dieselduck
Administrator
Posts: 2683
Joined: Sun Jul 22, 2007 1:41 pm
Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)

Cruise control sucks !

Postby The Dieselduck » Thu Feb 28, 2008 7:10 pm

You know I would have never though that Speed 2 would ever come up as a topic of discussion on this website, as a matter of fact I feel bad for admitting that I watch it in the first place.

I think the only worst movie was snake eyes - now that was really bad. Yes it was aboard a ship, a good cast with lots of potential, with plenty of opportunity to say something right but alas, stupidity from the start to the end, especially from the engineering standpoint. I think the only accurate representation of anything maritime was the "bridge officers". ehehehehehe

....oh I am going to get some :twisted: for that comment. :lol:
Martin Leduc
Certified Marine Engineer and Webmaster
Martin's Marine Engineering Page
http://www.dieselduck.net

User avatar
Sébastien
Engineering Mentor
Posts: 97
Joined: Mon Oct 01, 2007 5:06 am
Currently located: Québec

Postby Sébastien » Fri Feb 29, 2008 4:59 am

This is not a blooper but rather a funny moment in a movie: in the old classic Das Boot the second engineer bursts his bubble, starts screaming and wants off the sub. The chief engineer orders him back into the engine room at gun point and then two oilers come and forcefully bring him back into the hole. Imagine that happening today.

User avatar
JK
Enduring Contributor
Posts: 2676
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Postby JK » Fri Feb 29, 2008 7:41 am

I just watched that on Saturday for the umpteenth time. I think it is the best ship movie made.

As for Speed2 , what a Godawful movie...though it was rather neat how they did a high speed bumper car run down the side of the tanker.

User avatar
ArkSeaJumper
Engineering Mentor
Posts: 124
Joined: Fri Sep 07, 2007 8:02 am
Currently located: Ireland

Postby ArkSeaJumper » Fri Feb 29, 2008 8:07 am

Worse still is when you are watching a Discovery channel program about shipping or ports or ‘Big Ship construction’ and they get basic facts completely arseways.

User avatar
D Winsor
Superintendent
Posts: 325
Joined: Thu Nov 22, 2007 8:23 am
Currently located: Dartmouth

Postby D Winsor » Wed Mar 05, 2008 2:27 pm

I watched last Monday's episode of the CBC Series "The Border"
The episode concerned stowaways on a ship in "Halifax Harbor". The show started with scenes of Halifax but quickly switched to the Algobay in Toronto Harbor.
Many of the Algoma Logos, such as the Stack Logo and the Vessel Name were blanked out but on the Bridge and in the engine room many "Algoma" policy plaques were plainly visible.
The ship was supposed to be ready to sail but the Winter Gangway was very securely welded to the ship side.

User avatar
JK
Enduring Contributor
Posts: 2676
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Postby JK » Thu Mar 06, 2008 11:39 am

Has anyone seen the new series, The Guard, shot out west on the SAR 47 footers?

User avatar
The Dieselduck
Administrator
Posts: 2683
Joined: Sun Jul 22, 2007 1:41 pm
Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)

Image is a priority

Postby The Dieselduck » Thu Mar 06, 2008 12:00 pm

I just downloaded it, but I haven't started watching it yet. It looks pretty drama "ish". I forget which they are using, but I believe its the Cape St James and is filmed in Squamish BC.

The show season is over but you can catch it on your Global TV stations, on Tuesday nights at 10pm, or download it from the Global Website.

http://www.canada.com/globaltv/globalsh ... index.html
Martin Leduc
Certified Marine Engineer and Webmaster
Martin's Marine Engineering Page
http://www.dieselduck.net

Brent H
Bilge Dweller
Posts: 2
Joined: Thu Mar 06, 2008 3:08 pm

The Guard

Postby Brent H » Thu Mar 06, 2008 5:38 pm

Don't bother watching.....

embarassed to work for them with that on the air....

All things being told the company making the series has no budget to film on any of the bigger ships. Coast guard gave them time on the 47's for the PR.

No engineering, ranks and stuff all messed up, way to over the top for dramma

yuck

User avatar
JK
Enduring Contributor
Posts: 2676
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Postby JK » Fri Mar 07, 2008 8:17 am

So, gave them vessel time without any creative consulting to get it right.

I'm glad I didn't waste my time looking for it on the tube.


Return to “Crew Mess”

Who is online

Users browsing this forum: No registered users and 1 guest

 

 

cron