New launch: 2-Hook Lift Factors and Lift Point Loads

General maritime and engineering discussion occurs on this board. Feel free to post newsbits, comments, ask questions about maritime matters and post your opinions.
thenavalarch
Leak Patrol
Posts: 35
Joined: Fri Nov 15, 2013 10:45 pm

New launch: 2-Hook Lift Factors and Lift Point Loads

Postby thenavalarch » Mon Apr 24, 2017 6:59 pm

Hi!

TheNavalArch launches a new product: 2-Hook Lift Factors and Lift Point Loads.

This excel app can be used to calculate the lift factors and lifting point loads for a standard 2 hook lift with four lifting points (see figure)
1. Based on Nobledenton Guidelines for Marine Lifting and Lowering Operations, ND-0027, Rev 11
2. Calculates the Load factors like DAF/Yaw factor and tilt effect on the lifted object
3. Calculates the Crane hook loads
4. Calculates the Lift point vertical loads
5. Very useful for marine lifting/lowering operations to calculate lift point loads. These can be used to design the slings, and evaluate the strength of lift point rigging/pad-eye/shackles etc

Find out more here:

https://thenavalarch.com/software/marine-operations/mo-08-2-hook-lift-factors-lift-point-loads/

User avatar
Merlyn
Fleet Engineer
Posts: 748
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK

Re: New launch: 2-Hook Lift Factors and Lift Point Loads

Postby Merlyn » Tue Apr 25, 2017 3:37 am

Interesting expansion on brothers.
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.


Return to “Crew Mess”

Who is online

Users browsing this forum: No registered users and 1 guest