Hi!
TheNavalArch launches a new product: 2-Hook Lift Factors and Lift Point Loads.
This excel app can be used to calculate the lift factors and lifting point loads for a standard 2 hook lift with four lifting points (see figure)
1. Based on Nobledenton Guidelines for Marine Lifting and Lowering Operations, ND-0027, Rev 11
2. Calculates the Load factors like DAF/Yaw factor and tilt effect on the lifted object
3. Calculates the Crane hook loads
4. Calculates the Lift point vertical loads
5. Very useful for marine lifting/lowering operations to calculate lift point loads. These can be used to design the slings, and evaluate the strength of lift point rigging/pad-eye/shackles etc
Find out more here:
https://thenavalarch.com/software/marin ... int-loads/
New launch: 2-Hook Lift Factors and Lift Point Loads
-
- Leak Patrol
- Posts: 42
- Joined: Fri Nov 15, 2013 10:45 pm
- Contact:
- Merlyn
- Fleet Engineer
- Posts: 1024
- Joined: Wed Dec 25, 2013 7:19 am
- Currently located: South Coast UK
- Contact:
Re: New launch: 2-Hook Lift Factors and Lift Point Loads
Interesting expansion on brothers.
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.