MSC Opera Crash In Venice

General maritime and engineering discussion occurs on this board. Feel free to post newsbits, comments, ask questions about maritime matters and post your opinions.
Bilge*Rat
Bilge Dweller
Posts: 2
Joined: Mon Jun 03, 2019 5:39 pm
Currently located: Northern Illinois, USA

MSC Opera Crash In Venice

Postby Bilge*Rat » Tue Jun 04, 2019 2:33 pm

The MSC Opera was inbound to the Venice Marine Terminal, but underwent some kind of a "technical fault" on the way in. Maximum speed in the Giudecca Canal is limited to 6 knots; when the ship went past Redentore, it was making 5.8 knots, but when the allision occurred at the San Basilio Marine Terminal, MSC Opera was making 6.8 and looked to still be under power when it hit the M/V River Countess. I've been in contact with friends in the city, and they say that at least part of the problem was that the tug on the Opera's bow parted it's tow line. Has anyone heard anything as to what may have gone wrong with Opera's propulsion system? There was a reference in one news article to a "locked" engine, but I'm putting that one off to reporters generally not knowing much about what they report on.

User avatar
JK
Enduring Contributor
Posts: 2872
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Re: MSC Opera Crash In Venice

Postby JK » Wed Jun 05, 2019 11:00 am

I'm wondering if the telegraphs or propulsion control locked up. There's not much design info online for those ships that I have seen.

Bilge*Rat
Bilge Dweller
Posts: 2
Joined: Mon Jun 03, 2019 5:39 pm
Currently located: Northern Illinois, USA

Re: MSC Opera Crash In Venice

Postby Bilge*Rat » Mon Jun 17, 2019 7:52 am

Thanks. I was wondering about that myself. I haven't heard any news on this so far other than the Opera was back in the lagoon again as of a couple days ago. We have a friend in town there; if I get any information from them, I'll put it up here.


Return to “Crew Mess”

Who is online

Users browsing this forum: No registered users and 1 guest