TC 1st Clas needed for Canship Ugland, NF

Employers looking to fill Marine Engineering or related positions can do so here.
User avatar
The Dieselduck
Posts: 3110
Joined: Sun Jul 22, 2007 1:41 pm
Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)

TC 1st Clas needed for Canship Ugland, NF

Postby The Dieselduck » Fri Jun 09, 2017 8:28 am

Master / Chief Engineer
Engineering / Engineering Technology, Marine

Canship Ugland Ltd.
St. John's, Newfoundland & Labrador

We are a Ship Management and crewing company operating and managing a modern fleet of DP shuttle tankers, tugs, bulk carrier, pilot boats and a product tanker. In addition, we provide crew management services to other vessel owners and operators. We offer opportunities for career advancement, excellent compensation, pension plans, full benefits and a day for day leave system.

At present we have requirements for the following positions on a General Cargo vessel engaged in Arctic Sealift for the 2017 season. These positions will start approximately June 19, 2017

Master / Chief Engineer

Qualifications: All candidates must have previous vessel experience and hold appropriate Canadian certification to comply with regulatory requirements for the respective vessel and position. In addition you must hold valid Passport, Seafarers medical, First Aid certificate, WHMIS, Vessel Security proficiency. Some positions require, Vessel Security Officer, Bridge Resource Management and Marine Medical Care training. If you have any of this specific training, please outline this in your application

Apply by email or fax only and indicate in the subject line the position you would like to be considered for:


Canship Ugland Ltd
P.O. Box 8274, Station ‘A’
St. John’s, NF
A1B 3N4
Fax: 709-782-0225


Canship Ugland Ltd is an equal opportunity employer and encourages members of all designated groups to apply. Only those persons considered for an interview will be contacted. No telephone enquiries please.

Return to “Available Positions”

Who is online

Users browsing this forum: No registered users and 2 guests