Cdn fleet renewal - Made in China

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
Post Reply
User avatar
The Dieselduck
Administrator
Posts: 4131
Joined: Sun Jul 22, 2007 1:41 pm
Currently located: Nanaimo, British Columbia, Canada (West Coast of Canada)
Contact:

Cdn fleet renewal - Made in China

Post by The Dieselduck »

I think many engineer currently undergoing the "Canadian fleet renewal", will probably have some corroborating stories to share.

Martin

------------------------

Cefor: More Insurance Claims on Chinese-Built Ships
By MarEx 2016-04-25 19:42:31

The Nordic Association of Marine Insurers, or Cefor, has released its 2015 report on trends in marine insurance, and in its opening section, the association chose to highlight a trend of relatively high rates of hull & machinery claims for Chinese-built ships.

Cefor cautioned that it is usually hesitant to publish statistics by factors like builder, class, flag or engine maker, as correlation does not imply causation. "Claims statistics are influenced by numerous factors," the association said. "We are not suggesting that the country of build is the only explanatory factor. Nevertheless, the observed differences are considerable and unlikely to be purely incidental."

From 2007-2015, China, Japan and South Korea built 90 percent of the bulkers, container vessels, and crude and product tankers insured by Cefor members, and the study focused on these vessel types. The time period was marked by rapid growth in China's market share: by 2015, Chinese-built ships made up 42 percent of the vessels in the scope of the study.

The data show that "claims frequency has been 89 percent higher for vessels built in China and elsewhere in the world, compared to vessels built in Japan or South Korea" – in other words, an owner was nearly twice as likely to make a hull & machinery claim on a Chinese-built vessel over that period, as compared with a South Korean- or Japanese-built vessel.

Machinery claims led the way, with claims frequency for Chinese vessels running at roughly twice the rate for South Korean vessels and roughly three to six times the rate for Japanese vessels (depending on year of claim).

For larger claims, the difference is less stark, but still noteworthy. Claim frequency for values over $500,000 was 75 percent higher for Chinese ships than for Korean and Japanese vessels. For claims over $2 million, it was 52 percent higher.

Smaller ships showed the greatest differentiation between those built in China and those built in Japan and South Korea; Chinese-built container ships under 20,000 dwt showed a claims rate of over 60 percent. Cefor suggests that the difference is least between larger Chinese-made bulkers and their South Korean and Japanese counterparts, with claims for bulk carriers over 75,000 dwt approximately the same.

The association closed with a note that the data should not be interpreted as conclusive evidence regarding the quality of Chinese shipbuilding. "China has made major strides in modernising its shipbuilding industry in the past few years. The statistics of the past might therefore not be indicative of vessels built in the future. As outlined at the outset, we are not in a position to reach conclusions concerning the cause of the high claims frequency for vessels built in China. However, irrespective of the cause, it will be interesting to follow the performance of these vessels as they grow older," Cefor said.

Notwithstanding Cefor's caution, concerns about the quality of Chinese shipbuilding have been circulating in the industry for some time. “In China, building what are supposed to be two identical ships in two adjacent slips, you get two different vessels,” said Basil Karatzas, a Manhattan ship broker, speaking to the Times in January. “In Japan, they can build 10 ships and they are all the same.”
Revolver
Chief Engineer
Posts: 264
Joined: Tue Jun 07, 2011 7:55 pm
Contact:

Re: Cdn fleet renewal - Made in China

Post by Revolver »

Look, you don't go buy from Wal Mart when you want quality goods - same thing here.
The vessels just don't have the same feeling of 'strength' and quality of machinery. You can look at some pieces and you think for a second "...is that made out of plastic or what?".
Their Hulls are now commonly made with 'high tensile steel', so it's stronger, thinner, and lighter...They're like a tin can. Bulkers on the lakes that have been going through the locks are looking like tin cans bent between the ribs of the ship. 2 and 3 year old ships looking like they're 20-30 years old. It's a shame.

They say it'll be interesting to follow the performance of these vessels as they grow older - I imagine they wont have to wait to long to find out their results ha
User avatar
JollyJack
Fleet Engineer
Posts: 1184
Joined: Wed Mar 24, 2010 3:57 am
Currently located: Eastern Canada
Contact:

Re: Cdn fleet renewal - Made in China

Post by JollyJack »

Interesting to note that the thickness of the paint coats are considered part of the steel scantlings for hull plates.

Still, that won't concern Canadian seafarers, the crews will be "temporary foreign workers" on a work visa. I'd imagine the wages will be in the region of $30 a month, and they won't need MED refreshers in the Lakes.
Discourage incest, ban country "music".
Post Reply