Greasing stern shaft packing gland

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
Curt233
Mechanic
Posts: 60
Joined: Fri Apr 24, 2015 7:37 am
Currently located: Comox Valley

Re: Greasing stern shaft packing gland

Postby Curt233 » Wed Jul 06, 2016 7:35 pm

Ha

Curt233
Mechanic
Posts: 60
Joined: Fri Apr 24, 2015 7:37 am
Currently located: Comox Valley

Re: Greasing stern shaft packing gland

Postby Curt233 » Sat Jul 16, 2016 8:33 am

Well, the Tug was at the dock for 5 days, and we were able to get some work done. Fixed all the exhaust leaks, no more fumes in the engine room. New air cooler for the Port M/E. Had the old one cleaned and they found a hole. Valves/injectors/fuel rack was set up, they were all out. Now the engines don't smoke at all. I guess now I can paint the engine room. It's amazing what can get done when you are at the dock for a few days.

User avatar
Merlyn
Fleet Engineer
Posts: 783
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK

Re: Greasing stern shaft packing gland

Postby Merlyn » Sat Jul 16, 2016 9:36 am

Glad to hear it, now you can make up for it and move your bunk down below and flavour the atmosphere.
Fume free at last.
No more rheumy eyes, no coughing wheezing and barking like you were
cranking over prior to start up every morning.
Wonder if you'll miss it?
No more black looks.
You might run on a few extra years now, better increase that pension pay in every month.
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.

Curt233
Mechanic
Posts: 60
Joined: Fri Apr 24, 2015 7:37 am
Currently located: Comox Valley

Re: Greasing stern shaft packing gland

Postby Curt233 » Sun Jul 17, 2016 7:22 am

Ya you betcha!

User avatar
Merlyn
Fleet Engineer
Posts: 783
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK

Re: Greasing stern shaft packing gland

Postby Merlyn » Mon Jul 18, 2016 12:01 am

Well I think that all that remains to say is you best hope the wife recognises your new scrubbed look.
You know, bright eyed and bushy tailed.
A new man.
Dig out those old sunglasses for the newly painted engineroom.
No more skivving on the bridge gazing at that P.P.I.
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.

User avatar
Merlyn
Fleet Engineer
Posts: 783
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK

Re: Greasing stern shaft packing gland

Postby Merlyn » Sat Jul 30, 2016 8:39 am

Hi Curt 233, you connected those water rails back up last refit?
Hope you got that last packing turn out?
You sure?
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.

Curt233
Mechanic
Posts: 60
Joined: Fri Apr 24, 2015 7:37 am
Currently located: Comox Valley

Re: Greasing stern shaft packing gland

Postby Curt233 » Tue Aug 02, 2016 8:59 pm

No, not yet. Gotta have more down time than a day or two. Go Go Go here.

User avatar
Merlyn
Fleet Engineer
Posts: 783
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK

Re: Greasing stern shaft packing gland

Postby Merlyn » Sun Aug 07, 2016 11:17 pm

Sounds like Securicor Amoured Van to meet you on the Quay then with your bulging pay packet for the wife I trust.
Straight home mind.
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.

Curt233
Mechanic
Posts: 60
Joined: Fri Apr 24, 2015 7:37 am
Currently located: Comox Valley

Re: Greasing stern shaft packing gland

Postby Curt233 » Mon Aug 08, 2016 7:54 am

Ya pretty much.


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 1 guest