GEA Westfalia OSE 80- 0136_ Bowl leaking

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
mza03
First Time Poster
Posts: 1
Joined: Mon Mar 06, 2017 9:06 pm
Currently located: UAE

Re: GEA Westfalia OSE 80- 0136_ Bowl leaking

Postby mza03 » Tue Mar 07, 2017 8:35 am

Did someone found the solution to this problem....
because the same problem started with our purifiers....

wtu_smch
Bilge Dweller
Posts: 2
Joined: Tue Dec 19, 2017 9:08 pm
Currently located: dubai

GEA Westfalia OSE 10-91-067/8_ water discharge overflow alarm

Postby wtu_smch » Tue Dec 19, 2017 11:18 pm

hi sir,

kindly advice, issue on my fuel purifiers, online the separator feed valve open discharge clean fuel pressure is 2 bar, running i mints shut down for discharge water over flow alarm, i already change all the seals on bowl, but still same alarm

thanks
Mohamed Malik

Revolver
Chief Engineer
Posts: 219
Joined: Tue Jun 07, 2011 7:55 pm

Re: GEA Westfalia OSE 80- 0136_ Bowl leaking

Postby Revolver » Wed Dec 20, 2017 12:33 am

What's your fuel density/temp/cSt?

Revolver
Chief Engineer
Posts: 219
Joined: Tue Jun 07, 2011 7:55 pm

Re: GEA Westfalia OSE 80- 0136_ Bowl leaking

Postby Revolver » Wed Dec 20, 2017 12:34 am

And also, are any of your water supply valves leading?

wtu_smch
Bilge Dweller
Posts: 2
Joined: Tue Dec 19, 2017 9:08 pm
Currently located: dubai

Re: GEA Westfalia OSE 80- 0136_ Bowl leaking

Postby wtu_smch » Wed Dec 20, 2017 1:17 am

hi sir,
fuel density 0.850 and temp 30,
no valve, all connection is same original with system, thanks

Revolver
Chief Engineer
Posts: 219
Joined: Tue Jun 07, 2011 7:55 pm

Re: GEA Westfalia OSE 80- 0136_ Bowl leaking

Postby Revolver » Wed Dec 20, 2017 10:52 am

Oh, I assumed it may have been HFO.
Anyway, reel it back a lil
It shuts off on water overflow alarm...
Is it overflowing water or fuel or is t actually overflowing anything at all?

mdjahirul
Bilge Dweller
Posts: 9
Joined: Tue Mar 15, 2016 9:15 am
Currently located: Bangladesh

Re: GEA Westfalia OSE 80- 0136_ Bowl leaking

Postby mdjahirul » Sun Dec 31, 2017 5:20 am

Hi Big Pete,

At first I am sorry for very late reply.
You got the real picture. We recollect the fuel oil same way you described. We do all the changeovers by manual valve and diaphragm pumps.
Our LO purifiers are working excellent. We faced the problem for only HFO purifiers.

No, shortening de sludge interval not solving the problem. Other way our HFO quality is good, sludge product rate is less. So there in no point to shorten the de sludge interval.

Thanks.
Jahirul

nikhil0618
Bilge Dweller
Posts: 2
Joined: Fri Apr 27, 2018 4:44 am
Currently located: Jubail

Re: GEA Westfalia OSE 80- 0136_ Bowl leaking

Postby nikhil0618 » Sat Apr 28, 2018 8:24 pm

Ose 20 westfalia.. i am getting alarm 15 too much water..
I trued all the possible solutions given in the manual.
I have put water discharge monitoring new sensor but still the problem is not going.
Plz suggest something


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 1 guest