Hi all
I have a problem regarding my gea weatfalia separator onboard.
When it is running for about 10min, this “min separating time in SMS mode” keep coming. Does anyone have a same problem?
Can somebody please tell me what to do in this situation.
Program separating time already set to 3600sec. But problem still occured, please help. Thank you
Gea westfalia separator problem
Re: Gea westfalia separator problem
What's the book say about it?
Re: Gea westfalia separator problem
Inside manual didnt say anything about the problem stated above, thats why im asking here if in case anyone have encountered same problem before
-
- First Time Poster
- Posts: 1
- Joined: Fri Oct 09, 2020 6:14 am
- Currently located: South africa
Re: Gea westfalia separator problem
Hi, i also have the same problem with my HFO separator OSE -10. Unfortunately, i still dont know what is the main cause.
I found out that the SMS Actual pressure is going down thus, triggering to desludge the bowl earlier than the set desludge time. I thought that the problem is with the pressure transmitter PT2 but the problem still persists when we changed with new one. We cleaned the bowl parts and changed new gaskets but still the same. Please let me know if you have any idea on how to solve this issue. Thank you
I found out that the SMS Actual pressure is going down thus, triggering to desludge the bowl earlier than the set desludge time. I thought that the problem is with the pressure transmitter PT2 but the problem still persists when we changed with new one. We cleaned the bowl parts and changed new gaskets but still the same. Please let me know if you have any idea on how to solve this issue. Thank you