Bollard Pull Calculator Barges (Excel Engine)

A place to exchanges questions and ideas of a technical / procedural nature. Go ahead, try to stomp us !
thenavalarch
Leak Patrol
Posts: 35
Joined: Fri Nov 15, 2013 10:45 pm

Bollard Pull Calculator Barges (Excel Engine)

Postby thenavalarch » Wed Nov 20, 2013 8:21 am

Hi

http://www.thenavalarch.com is an endeavor by a group of freelance Naval Architects and Marine Engineers to make available more resources online for the Marine and Oil and Gas industries.

The following applications are now available on the website:


1. Barge Bollard Pull Calculator (Excel)

An excel sheet developed by http://www.thenavalarch.com for calculating the Bollard Pull required to tow a Barge (for Open Ocean tows only) .

See youtube video:

http://www.youtube.com/watch?v=o8VPeUjKMxw

Link:

http://www.thenavalarch.com/usedownload ... or-barges/

Features:
Very useful in Marine Operations
Gives 4 different methods to calculate the required Bollard Pull: DNV, OPL, BV and Empirical method.

2. Cargo Forces and Accelerations (Excel)

It is a spreadsheet to calculate the forces and accelerations on a Cargo onboard a vessel (for Open Ocean tows only)


A youtube video demo is here:

http://www.youtube.com/watch?v=TsRvzdySRRs

Link:

http://www.thenavalarch.com/downloads/m ... lerations/


Very useful in Marine Operations. These forces and accelerations can further be used to design the seafastening for the cargo.

It calculates both Motion Forces and the Wind Loads

The Motion Forces are calculated in accordance with Nobledenton Guidelines for Marine Operations, Rev 5 (June 2013).

The Wind Loads are calculated as per ABS MODU Rules, 2011. Different Height coefficients are applied to different zones of the cargo depending on its height.


Best regards

http://www.thenavalarch.com
Last edited by thenavalarch on Sun Jan 26, 2014 12:22 am, edited 2 times in total.

User avatar
JK
Enduring Contributor
Posts: 2691
Joined: Tue Sep 04, 2007 2:29 am
Currently located: East Coast, Canada

Re: Bollard Pull Calculator (Excel Engine)

Postby JK » Sun Nov 24, 2013 6:10 am

Welcome to the site and thanks for the link. I immediately flipped them to our navalarc!

thenavalarch
Leak Patrol
Posts: 35
Joined: Fri Nov 15, 2013 10:45 pm

Re: Bollard Pull Calculator Barges (Excel Engine)

Postby thenavalarch » Fri Jun 13, 2014 6:03 pm

Thanks for visiting the website. Looking to upload more useful products in future!


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 1 guest