The Brief Introduction of Roller and Wheel Fender

Got a part? looking for spares? Need something tangible? This is the place to post your wants and needs.
weixiao
Bilge Dweller
Posts: 3
Joined: Mon Jul 06, 2015 11:09 pm
Currently located: China

The Brief Introduction of Roller and Wheel Fender

Postby weixiao » Thu Jul 09, 2015 1:23 am

Roller and wheel fender is designed for shipyard, roll-on roll-off terminal and other occasion to limit shipping deflection offset. The main feature of roller and wheel fender is that when the boat berthed, the roller and wheel fender can turn and have 20 percent transformation to absorb some impact energy.
The features of roller and wheel fender:
1.The topside area of rubber fender is big,so the contacting stress is small.
2.With high energy absorption,low counter-force and it is suitable for the dock more than ten thousand tons.
3.The spacing between the 2 braces can adjust and the compressive deformation can up to 52.5 percent.
4.The outer layer of impingement plate is UHMWPE or nylon and the coefficient of friction is small.
5.Can be installed vertically and flatly and it doesn’t need to install anchor chain to support.

Return to “Trading Post”

Who is online

Users browsing this forum: No registered users and 2 guests