Good Day ,
I recently came across a bit of a challenging one and figured some of you based on the west coast may have some insight.
I am looking for a spare parts supplier/ spare parts manual / any other information available for a vessel that was Built in 1984 at RIVTOW industries. There is a set of hydraulic watertight doors that were supplied by Inlet metal & Machining Co. LTD. It seems any contact information i have on this is no longer valid. Just wondering if anyone can advise on
- Were they takenover by another company?
- Is there a contact that would have information from those days on RIVTOW builds?
- Any existing vessel still in operation that have doors that were supplied from the same place?
Any info helps
Thanks
TDC
Supplier for Water Tight Doors (blast from the past)
- JK
- Enduring Contributor
- Posts: 3066
- Joined: Tue Sep 04, 2007 2:29 am
- Currently located: East Coast, Canada
- Contact:
Re: Supplier for Water Tight Doors (blast from the past)
When I ran into that problem with watertight door hydraulics, I had to get Hawboldts in to engineer and supply a complete replacement. Hope you do better.
- Merlyn
- Fleet Engineer
- Posts: 1024
- Joined: Wed Dec 25, 2013 7:19 am
- Currently located: South Coast UK
- Contact:
Re: Supplier for Water Tight Doors (blast from the past)
I am not from the West Coast but what parts are you seeking?
Mechanical parts/ram seal kits or ?
Mechanical parts/ram seal kits or ?
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.