Hi John ! So, basically the problem still there, the water source are from technical water tanks , we have separate system for aft and fwd engine room. The filters for the blocks are check and clean. Also I have 4 lube oil separators running and without problems, this problem is just affecting hfo s...

I'm sorry for the late reply, I have one separator on each engine room back to service after I replaced all the flow regulating valves 1.6 for v10 / 11 L/M sv15 and 2.8LM for sv16 . This actually solved the problem of low PT5 on all separators. I'm impressed to be honest that I had the same issue on...

Hello again! Now the problem start to show up on another separator on different engine room, the model is S836 , this separator has been running for more than 2 weeks without problems, is a coincidence that also in this one is starting the same problem . The water supply and air supply for this one ...

Hello John! thank you for your answer, if I open displacement water the pressure for PT5 keeps steady around 1.6 bar and would pass water to the sludge tank. I checked the drain valve but there is no leak from there , PT1 pressure is 0.20 to 0.22 bar and the separator is working with MGO, we are not...

Good day gents, I'm having problems with my separator on PT5( water outlet ), when start the separator, for a few hours is working without problems , after that, start to lose the pressure on PT5 until came on alarm 0,2 bar . I have the same problem on 2 separators working on the same engine room , ...