New engine

General maritime and engineering discussion occurs on this board. Feel free to post newsbits, comments, ask questions about maritime matters and post your opinions.
User avatar
Merlyn
Fleet Engineer
Posts: 1024
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK
Contact:

Re: New engine

Post by Merlyn »

On a more practical note on Martins tweet depicting Wrenches there is one Wrench not shown.
What is it Andrew or anyone?
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

Well, you know that I have my myasthenia, 5 years and I have confirmed AChR antibodies .. My last resort is how bad it will be to be able to make me Plasmapheresis. It is a procedure of blood exchange in my body and depriving it of harmful antibodies .. I was quite interested in it because it can concern my health directly .. It is based on the fact that from my blood, apart from my body, these antibodies are gradually removed from her and back into my bloodstream .. when it is cleansed twice, more blood than I have, it can be full. Unfortunately it is not a complete cure, but for a longer period of time .. It is a bit similar to kidney dialysis .. which also removes toxins from the body ..
And now I came up with a new method of cleansing the blood without releasing it from the body, which is much safer because the blood will not infect. The invention of the method also came after inspiration by President Trump, who dreamed of disinfecting the body from inside ..
Image

I decided to call this method of blood disinfection Trumps Medicine. That is why I call it Medicine, because it is a completely new way, presumably allowing us to quickly get rid of many diseases of bacterial or viral nature ... that is, most of us oppressive diseases .. It consists in the vein, like during dialysis, we insert a needle, but with a needle no blood flows and we put a sterile optical fiber in it and seal the connection so that no bacteria get into the vein. Now we let in UV-C light that disinfects the blood from bacteria and viruses. Of course, we must carry out animal tests beforehand, what power of light can we use and at what frequency of spectrum ... dialysis lasts about 5 hours and a total of 50 liters of blood flows through the dialysis device .. I think that in this case turning on the UV-C socket for such a long period can effectively sterilize blood from unwanted viruses .. light can have several milliwatts in power and a pumping device for an optical fiber, this radiation can have several milliwatts and be powered by batteries .. in this way, even when walking, we can "heal" quickly and accurately .. But this requires careful analysis and selection of power, frequency, type and usage of this .. I think that for starters, tomorrow the leading laboratories should already introduce fiber optics into the veins of animals and explore this extremely promising method .. The production of a diode laser at such frequencies recently, allows the fiber to be pumped, and the exact manipulation of it. Also, after developing the method, you can absolutely choose a sterile method similar to that used in emprom memories erased by ultraviolet through a special window. Namely, such a window can be implanted in the vein, and through it do not dose this ultraviolet, which will be a completely sterile method of "treatment". Here are some links that may be helpful for developing this branch of medicine .. Because it seems to me that we will also have an impact on cytokines and storms exerted by them ... but it is experience that must show and appropriate ways ..

https://corporate.jp.sharp/rd/n36/pdf/104_08.pdf

https://phys.org/news/2020-01-laser-dio ... ep-uv.html

https://www.lasercomponents.com/de-en/p ... 60-315-nm/

https://www.sciencedaily.com/releases/2 ... 095048.htm


Andrew 8) 8)

Well, there is already a medicine for my myasthenia gravis, but because of the amount of my retirement I am not in danger of using it .. :lol:
His name is Soliris https://alexion.com/our-medicines/medicines/soliris
User avatar
Merlyn
Fleet Engineer
Posts: 1024
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK
Contact:

Re: New engine

Post by Merlyn »

No Andrew,
Soliris is not the name of the missing wrench.
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

For now, the first animal experiment is successful Trumps Medicine and the fish don't die ...
And the leds are with or without ozone access ... I think that the newly created medicine department at the University should examine the rest and determine ...


https://www.youtube.com/watch?v=ODss_J26Tuc

https://www.youtube.com/watch?v=5tQfzKA ... e=youtu.be

http://www.geni-uv.com/

https://www.oxxius.com/applications/biophotonics/

Andrew :D
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

Well, I will explain why the dose of this UV-C may be microscopic .. because the vein has a small diameter, maybe 3 mm, and the intensity of UV-C light decreases with the second power (with a square distance) ) at such a small distance, the light is very close to the virus, and even its low intensity will damage its DNA ..

You have to bury some in the history of medicine .. They tried UV with it a long time ago

https://www.nobelprize.org/prizes/medic ... EIMm39_mDM
https://www.crr.columbia.edu/research/u ... 7wjBdMBYnk

Andrew :D
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

Merlyn wrote: Sun Apr 26, 2020 9:35 pm No Andrew,
Soliris is not the name of the missing wrench.
Well, maybe you know a locksmith, who will make this key?

Andrew :D
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

Feliks wrote: Mon Feb 16, 2009 8:33 am In my latest solving the oscillatory dynamo, a diode who exchanged the changeable oscillatory electricity for the electricity about the permanent polarity was crucial element
Such an element fulfilling identical functions as the diode exists in the hydraulics of theses. There is a valve one-sidedly letting it in to water. it is opening for example only then when the pressure from the feeding side exceeds certain described by the threshold e.g. 10 bars. When the pressure is on the feeding side it is smaller, the valve is closing it oneself. and doesn't allow for moving back waters.

The principles of operation are the same like at pumping the bicycle wheel up with pump, but will refer to water. In this way we can hold. in the pipeline pressure e.g. 10 bars, and from leaking out of the pipeline who will be above the pump e.g. 100 meters will be sailing out water.
The one straight line I decided to use the principle for the production of the electric current with the help of sea waves. Although he is supposed to produce the electricity, it is being imported these are for inflating the problem waters sea into the container with water sea e.g. to height 100 of meters, or similar (e.g. on high cliff seashore). The rest is known and professionally made as the normal power station aqueous, but in this case she will be to sea brine. isn't buying it special one should actually solve the difference, only a matter of the precipitated corrosion .


Particularly that such a very similar solution was already on an island applied Okinawa, in the version of the power station pumped storage (but pumping into the container with the help of the electric energy- classic pumped storage).

Into my to pump the version this brine there will be sea waves driving water pumps with valves with diodes into the container Leaking in water only in direction of the container. pipes from pumps into the container will also have middle diameter, in order to in the time of whom from valves, not to waste the energy from different good pumps. Unfortunately the number can reach such pipes even 1000, at the productivity every e.g. 1 m^ 3 / sec.
But by it we can get the power of such a power station 1000 of the MW .

Costs of making such a power station will also be smaller, since for her devices won't have to pump water into the container how it is in classical power stations of this type. Machines will be so like by a normal hydroelectric power plant straight lines and no high cost.

http://www.new4stroke.com/salt%20water% ... torage.pdf

Image

Also shortened descriptions Polish pumped - storage to slight differences of the water levels (100 m) is describing http://www.pistonheads.com/gassing/topi ... 7463&i=260 or
http://www.new4stroke.com/plants.pdf


Gross from many centuries of coasts England and Ireland they were attacked by marine waves .
People built obstacle for these waves sometimes, that they did not prevent from life on islands.
I think that would end this immemorial war goods , and invite this ocean on coast, but that it is high, it belongs it help. It belongs to take advantage it waves, in order to they pumped on its high coast of water.
I think, so around England , Ireland , North America ,shall made this power plant.
More belongs to place in ocean for water pomp e.g.

Pistons type , or my idea half rotate, which will drive usual floats clinched for they behind assistance of rope. Ordinary belongs to place behind each pump bolts, which will be opened e.g. at 10 kG/cm2 (Acting similar for diode I my oscillating dynamo) and which for collect tubes for reservoir on high coast miss water drive it.
Collecting tube should for example for flow 1 m3/sec 0,6 m have diameter.



For achievement in such this collecting tube of flow 1 m3/sec and 10 bar , requirement 12 pump wanted for transport water on according to following specification 100 m height too reservoir.

Pump reconciles, for simplification about normal piston, should have 0,6 m diameter, and 3 m of height. During average jump of rippling 2 m, it will give during one cycle for composite tube 0,5 m3 water pushed (S= 28 dcm2 H= 20 dcm (2 meter) = 560 dcm3 (liter). For set up flow 1 m3, TWO such pumps should pump for collecting tube.
For proper fabrication of pressure on exit of pump ( set up 10 bar ), wanted proper swimmer is.
There is simple account surface of piston of pump will together page (S) x 100 surface of swimmer.
In my example, surface of piston of pump it 28 dcm2, it signifies that swimmer)should have 2800 dcm2. In order to swimmer had such surfaces, it must have 20 m diameter, and definitely 1 m of height. It needs one kit about 12 pumps 12 swimmers 20 m each diameter, or about dimension one swimmer 12 x28 m2= 336 m2.

For behavior some reasonable spans, it is possible to accept, that for such array for production capacity 1 m3/sec 10 bar, wanted near 700 m2 place rippling sea .

Need for continuous supplying tank for power station theoretically 700 m3/s (716 MW , 100 m height ) requirement 700 x 700m2 = 490000 m2 rippling sea . It is theoretically only 700 m x 700 m !, when 2 m average heights of waves.


Here, mathematical enumeration same only:

To 1m3/ sec
1 m^3/sec 10 bar(H=100m ), 600 mm diameter pipe and piston pump, S= 28 dcm2 Hwave= 20 dcm (2 meter) = 560 dcm3 (litre) for 1 m3 need 2 piece . but period are 6 sec , sum 6x 2 = 12 piece pump .

S pump= 28 dcm2 , 10 bar, F =28 T, Hfloat >1m, S float ~~=2800 dcm2 (28 m2) , D float =~~20m
12 piece x28m2 =336 m2 ~~ =100m x 7m using area =700 m2

700 MW (700 m3/sec), H=100m
700 m2 x 700 = 350000 m2 . ~~700m x 700m area of wave



As elements are presented from marine waves over system production current professional , they are built in the world already and test, additional requirement of experience for their building not.
Another, very important information in relation to the system. System the one should be only as storage, rather than storage-pumped what significantly the height of investments will lower in comparing to current answers. Costs will only be so like for an ordinary hydroelectric power plant
Only water pumps with valves (diode) can so that touch up still and selected materials. but in general, it is piston pump known for the antiquity. Summing up, mechanical problems are solved, and with the appropriate swing one should only build such a power station.
The degree of the safety of such containers will also be very high, since put very close the sea, in case of the breakdown of unsealing, they won't cause heavy losses, since water quickly will find its way back to the sea.

I think that wonderful geographical conditions will permit on high cliff Scotland England and Ireland, to build such containers into whom sea, highest waves will be pumping brine on average in world a lot. it means that the efficiency of such a system will be most effective in world, and therefore built containers should be around these countries what in the future can guarantee the green energy for all countries Europium.

Regards Andrew :)
There is strength in water ... I discovered it in 2008, publishing how to obtain electricity from sea waves in a relatively easy way. You need sea water with the help of waves, pump to a high sea shore to a large salt water tank ... .. For pumping, use thousands of small water pumps, driven by small floats .. Recently, I even managed to find a film that perfectly explains to everyone what I mean .. Instead of a man, you should put a water pump, which with the help of a float these 100 l of water will pump .. You should set up such layouts, one hundred or two hundred, cover them with the entire sea shore .. The way I came to this is in my publications, since 2008

https://www.new4stroke.com/fale%2011.mp4

Andrew
User avatar
Merlyn
Fleet Engineer
Posts: 1024
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK
Contact:

Re: New engine

Post by Merlyn »

IMG_0891.JPG
Certified photograph of spare engine for Andrew ( aka Felix ) latest innovation
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

Merlyn wrote: Sat Jul 18, 2020 8:29 am IMG_0891.JPGCertified photograph of spare engine for Andrew ( aka Felix ) latest innovation
Thanks :D

Image

one person 100 Kg 1 meter up and down gives 1 KW each time
Andrew :D
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Odp: Nowy silnik silnika silnika

Post by Feliks »

Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

fale-11.gif
Hand_Car_Animation2.gif
Yes, here it is a source of inexhaustible energy .. Its density is 1000 times better than that of air .. so the devices can also be 1000 times smaller


https://www.new4stroke.com/fale-11.gif[/img]


Here instead of a water pump, this pier can drive generators directly instead of wheels ..
https://www.new4stroke.com/hand_car_animation2.gif[/img]


And here is a film that shows that such a motor (half rotate) cannot be effectively braked A for waves, it is enough to make sufficiently long arms, and it will also work with great efficiency.

https://www.new4stroke.com/drezyna.mp4


Andrew
User avatar
Merlyn
Fleet Engineer
Posts: 1024
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK
Contact:

Re: New engine

Post by Merlyn »

Hi Andrew/Felix,
With further reference to a certified photograph of your spare engine and your comments " one person 100 kg 1 metre up and down gives 1 kw each time " cannot be applied to the spare engine depicted by me July 18 last for the following reasons listed thus;
This spare engine was manufactured not in China but in U.K. and as such conforms with U.K. Legislation viz;
One horse power in U.K. Legal requirements states " one horse power is depicted as "the power needed to raise a weight of 550 Ibs a distance of one foot in one minute "
As the spare engine is of UK manufacture this renders your foreign measurements redundant and as such cannot be applied in this case.
Also further to your interest the horse is also of UK manufacture and as such my advice to you, ( if I may suggest ) would be to abandon all those foreign measurements and conform to £sp which directly translates as pounds shillings and pence, i.e. IMPERIAL.
This will, no doubt be beneficial to your future advanced complex design work which many of us over here sometimes struggle to comprehend but speaking solely for myself could well be beyond my limited scope of understanding these future risk assessment designs refer to.
Please bear in mind though during the changeover all fitments such as spanner sizes wil need to be expressed in BSF, BSW and BSP.
UNF and UNC will however be permitted.
Should you encounter any problems here worry ye not ( as we say over here in Dorset ) for I still have, amongst my souvenirs all of the foregoing together with necessary taps and dies, drills and dienuts.
So I urge you to convert ( as they say ) and update your drawing room dept.
After all, as they say, it all makes sense.
So go on, get converted asap pdq.
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

Merlyn , all in IMPERIAL :)

I would also add, young people who can be fooled with masks and strictly adhere to this .. As the Professor rightly writes about the infection and the severity of the disease, the QUANTITY of the virus decides, Now let's imagine that we are already infected, but asymptomatic and without knowing it, we wear a mask, which stops almost all the viruses that we exhale .. Suddenly, with our next INHALATION, the amount of the virus in our body increases, and of course we will get seriously ill .. And for that it is enough to be familiar with basic medicine and have some common sense .. if we did not wear a mask , these are the viruses that we exhale would leave our body completely, and those that would remain, at most asymptomatic disease, would support the disease, or with minor symptoms, because our perhaps not even the best immune system would cope with them ... Yes, even if some viruses will come to us, they cannot be cut back to the environment in the form of a mask, because simply too much . We want to increase their amount in our body, much more than we have come from outside .. .. And this simple logic cannot be questioned by ANYONE .. So, if you want to LIVE, do not wear a mask, because even if you get sick , you will arrive with little symptoms, as with the classic flu .. And the fact that the whole world has gone crazy and you see the pictures as it is now, it does not mean that you have to do the same as in the pictures .. Because this is about YOUR LIFE. .



Please use Google translator ..

https://www.onet.pl/styl-zycia/onetkobi ... Co0UxcsGMI

Well, I think I've come up with the best vaccine for Coronavirus yet ..! Supposedly, a vaccine, that is, in general, introducing a small amount of viruses into the body to stimulate our immune system to fight these pathogens, and the production of appropriate antibodies so that, when such viruses encounter such viruses, they can fight them. it depends not on the "vaccine" as such (watery liquid), but on our own ANTIBODIES produced by it, which theoretically protect us from getting sick .. So we need ANTIBODIES, not "vaccines" ... Where can we get ANTIBODIES from? . Well, it is enough that we get infected, but with a LITTLE amount of viruses, and the body will produce these antibodies for us ...! What does it take to get infected with a LITTLE amount of viruses? Well, WE NEED TO PULL THE MASKS FROM OUR FACE! And of course, then avoid staying with seriously ill people for longer than 15 minutes, as the Professor explained to us. Then you can do a two-day self-quarantine without leaving your home, so that the body has the strength to produce these antibodies, even still being sick asymptomatically, .. and we should ALREADY BE CIRCLED by the coronavirus, the germs of which have reached us .. I think that such "vaccinations" should be FORCED, otherwise this pandemic will destroy us! Well, being already "hooked", we absolutely must not wear any masks, because they, despite vaccination, may prevent us from expelling viruses that do not harm us in a small amount .. I think that a decree should appear on November 2 , about such a COMPULSORY "VACCINATION", for ALL CITIZENS. I wish you good health!

Andrew
Feliks
Superintendent
Posts: 434
Joined: Sat Jan 05, 2008 4:45 pm
Currently located: Kraków,Polska
Contact:

Re: New engine

Post by Feliks »

Today I will propose the fastest and most powerful STEAM locomotive in the world. It consists of two parts: the first is the most modern electric locomotive currently produced. Surely it has all the necessary things that are needed nowadays .. the second part connected to it is a steam boiler driving a half-rotary star engine with many "cylinders" (e.g. 60 , or in other side 120 )), which can produce about 10 MW of power .. And it drives an ordinary large generators, also with a power of the order of 10 MW, which gives electricity to the first segment - an electric locomotive .. In this way, we avoid many limitations of a classic locomotive, and the efficiency of such a system is greater, because the cylinders do not have half rotate crossheads, on which a lot of energy is lost ...
And this is how the age of the couple is not over yet, and I will be used, for example, in such Africa for many years. Greetings to everyone and let your heart pair up, this is the way I will go ...

Now we can get excited, probably we will be able to speed on the railroad track .. here is the electro-locomotive, which set the world speed record of 357 km / h (ES64U4). Considering its weight, it is a good result .. now, I suggested that she should do it, without electricity in the network, but only an attached "steam locomotive" which generates electricity for her ... in the amount of about 10 MW.


And I think that such a set can be more economical in terms of thermal energy consumption than traditional transmission from power plants through the electric network to the railroad tracks .. Here, with such transmission, we have about 30% losses ..
Now, if we add to this the depreciation and maintenance of the expensive transmission network, which may be in the amount of another 20%, it will give us a number of 50% savings for such a solution ..
And all this thanks to the half rotate engine (as a further development of the new 4 stroke), as a steam engine, which is also more efficient, because its "pistons" do not rub against the cylinder walls, and it does not have to have a crosshead.
locomotywa niska.jpg
604.gif

Andrew
locomotive 357.jpg
User avatar
Merlyn
Fleet Engineer
Posts: 1024
Joined: Wed Dec 25, 2013 7:19 am
Currently located: South Coast UK
Contact:

Re: New engine

Post by Merlyn »

Can't work out where the prop. bolts on to this?
Thought the rings "rub" against the cylinder walls not the piston?
Or is it a knackered engine?
Crankcase compression version?
Pipe on the crankcase breather discharges at the rear of the engine to provide much needed thrust?
Dynamo?
Could this be the mark one version methinks?
Forerunner of the alternator?
Remembering The Good Old days, when Chiefs stood watches and all Torque settings were F.T.
Post Reply